Com Express CPU Module with 2nd Generation Intel® Core™


Click to Enlarge


• Intel® Core™i7 and Core™ i5
• High Performance and Low Power
• Direct mounted CPU and RAM
• Three video ports
• Wind River Linux and Windows
• Extended operating temperature


The CPU-162-14 is a COM Express module that delivers incredible performance
and power efficiency: it supports dual and quad core 2nd Generation Intel®
Core™ CPUs, providing the right power/performance profile for any application.

Designed for maximum reliability, the CPU-162-14 supports up to 8GB ECC
memory, with memory and CPU soldered directly on the board to provide
superior resilience to mechanical stress and vibrations.

With a Basic Module form factor, the CPU-162-14 packs a large number of
peripherals in a very compact design: Gigabit Ethernet, four SATA, eight USB,
three video ports, x16, x4 and two x1 PCI Express and PCI.

The CPU-162-14 simplifies programming and development with support for
Window® 7, Windows® Embedded Standard 7 and Wind River Linux.


Flat Image



Technical Specifications

• Intel® Core™ i7-2715QE / 2.1GHz, 45W
• Intel® Core™ i7-2655LE / 2.2GHz, 25W
• Intel® Core™ i7-2610UE / 1.5GHz, 17W
• Intel® Core™ i5-2515E / 2.5GHz, 35W
Chipset: Mobile Intel®QM67


• Direct-mounted DDR3-1333 SDRAM up to 8GB, ECC supported

• Factory option configurations: 1GB/2GB/4GB/8GB

• Dual channel (1GB supports single channel only)


COM Express

• PICMG COM.0 COM Express Module Base Specification Rev 1.0

• Basic Module size (125mm x 95mm)

• Type 2 Pin layout (SDVO replaces PATA)

System I/O

• PCI Express 2.0: X16 1 port (X8 2 ports available as factory option), X4 1 port (X1 4 ports available as factory option), X1 2 ports

• Graphics: Analog VGA / SDVO / LVDS 1 port each

• 2x SATA-600 + 2x SATA-300

• 8x USB 2.0

• 1x Ethernet 10/100/1000BASE-T

• 1x PCI(32bit, 33MHz, 3.3V)

• 1x LPC

•1x SMBus

•1x I2C Bus

•4x GPI + 4x GPO

Supply voltage:

DC 12V (VCC_12V) 12.0V, ±5%, max 13.4A
DC 5V (VCC_5VSBY) 5.0V, ±5%, max 0.8A
DC 3V (VCC_RTC) 3.0V, max 6uA

• 125mm (W) x 95mm (L) x 21mm (H) (incl.8mm height for heat spreader and spacers)

• Heat sink is optionally available

• Weight: 285g


• Operating Temperature: 0ºC to +60ºC, -40ºC to +85ºC (optional)

• Storage Temperature: -10ºC to +70ºC

• Humidity: up to 80%RH (no condensation)

• RoHS compliant


back to top