CPU-71-10 (DPD)

VMEbus Pentium Core2 Duo Single Board Computer


CPU-71-10 and XPDPTB

Click to Enlarge


Features

  • Intel®Core-Duo Processor @ 1.66 GHz
  • Intel® Core2 Duo Mobile Processor L7400 @ 1.5 GHz for 64-bit operation
  • E7520 Chipset for PCIe support and high memory bandwidth
  • On-board SVGA Controller
  • Two Gb LAN front panel ports plus two more routed to the backplane in compliance with Vita 31.1
  • Supports two PMC sites, one of which optionally supports XMC modules
  • Available in conduction cooled versions for rugged applications
  • Support for Windows, VxWorks, Linux, QNX and Solaris
  • 2 or 4 GBytes of DDR2-400 memory

 

The CPU-71-10 is a VMEbus (and VME64) compatible platform based on either the Intel® low-power Core-Duo (Yonah) processor or the Intel® Core™2 Duo Mobile Processor L7400. The CPU-71-10 takes advantage of the Core-Duo’s low 15 W power consumption (Core 2 Duo at 17W)as a rugged Single Board Computer (SBC). It is optionally available as an IEEE 1101.2-compliant, conduction-cooled VMEbus module with wedge locks and a full-board heat sink for high shock/vibration environments and temperature extremes.

The E7520 Memory Controller Hub (MCH) and 6300ESB I/O Controller Hub (ICH) chipset supports PCI-X and PCIe expansion, USB 2.0, ATA/100, and Serial ATA (SATA). Two Gb Ethernet ports and two USB 2.0 ports are accessible from the front panel in addition to two PMC bezels. On-board CompactFlash permits single-slot booting. Two VITA 31.1-compliant, 10/100/1000BaseTX ports are routed to the backplane. Two SATA ports, VGA video, two Gb Ethernet ports, four RS232 ports, one RS422 port, an IDE interface, PS/2 mouse & keyboard, and two more USB 2.0 ports are routed to the backplane. Two PMC-X site is provided for additional I/O expansion. Conventional PC I/O is accessible with industry-standard connectors on optional rear I/O modules.

Offered in convection-cooled and rugged conduction-cooled versions

Conduction-cooled CPU-71-10




front view without heatsink


CPU-71-10 Block Diagram


XPDPTB
optional rear transition module


CPU-71-10 Back

 


Technical Specifications
Core Duo Processor

1.66 GHz, 479-pin uFC-BGA Core-Duo manufactured with low-power 65 nm process

2 MB L2 Cache

667 MHz front side bus

Core™2 Duo Mobile Processor L7400

1.5 GHz, 479-pin uFC-BGA Core 2 Duo manufactured with low-power 65 nm process

4 MB L2 Cache

667 MHz front side bus

64-bit OS and application support

Single-slot Operation Single-slot VMEbus operation with an on-board compactFlash disk for bootable mass storage

E7520 & 6300ESB Chipset

Two x4 PCI Express interfaces are routed to two dual Gb Ethernet controllers

One x8 PCI Express interfaces is routed to an XMC site

DDRR2-400 DRAM interface with a max memory bandwidth of 6.4 GB/second

Four USB 2.0 Ports

PATA/100 and SATA/150 support

PCI-X 64/66 for the two PMC sites

PCI 32/33 for the Universe IID VMEbus bridge and the Silicon Motion SM712 VGA controller

DRAM

2 or 4 GBytes of DDR2-400 memory

Two banks that are each 64 bits wide with 8 bits for ECC support

VMEbus

Tundra Universe IID PCI-VMEbus interface provides 64- bit VMEbus transfer rates over 30 MB/sec

Full range of software drivers is available for different operating systems

Full Slot 1 (system controller) functions provided

Lower cost versions available without VMEbus

PMC Expansion

Two PMC sites based upon PCI-X bus with 64-bit 66 MHz

One of PMC sites also supports XMC modules with x8 PCIe

Ethernet

4 10/100/1000 BaseTX

2 Gb Ethernet ports are available from front panel (only available on convection cooled versions)

2 Gb Ethernet ports are routed to P0

Graphics

Silicon Motion SM712 graphics controller

The M1 offers 8 MB DRAM on chip

SVGA interface routed to P0

IDE

Primary ATA/100 DMA IDE interface is accessible from the VMEbus

P2 connector PIO and bus master support

Secondary IDE port is routed to a Type II-compatible CompactFlash connector for on-board booting

BIOS

General Software's flash-based system BIOS with a variety of boot options, including CD-ROM and PXE over Ethernet

Customized versions available upon request

Watchdog Programmable watchdog timer for system recovery
Core2 Duo Mobile Processor L7400
Delivering breakthrough energy efficient performance for embedded platforms. 65 nm process technology makes it possible to integrate two complete execution cores in one physical package, providing advancements in simultaneous computing for multi-threaded applications and multitasking environments. While incorporating advanced processor technology this processor remains software compatible with previous IA-32 processors. Executes four instructions per cycle to improve execution speed and efficiency using 14-stage pipeline. Supports 64-bit instructions, providing flexibility for 64-bit and 32-bit applications and operating systems.
E7520 Memory Controller Hub
The Intel E7520 chipset acts as the central hub for all data passing between the core system elements including processor, memory, PCI Express I/O, and legacy I/O subsystems. The Intel® E7520 chipset enables a variety of high-performance, low-power designs with improved platform reliability and system manageability. This chipset utilizes revolutionary PCI Express1 serial I/O technology and next-generation DDR2 memory technology to help increase I/O bandwidth and reduce system latency for data-intensive applications. The 533 MHz bus allows this chipset to support Intel® Core-Duo processors.
6300ESB I/O Controller Hub
The Intel® 6300ESB I/O Controller Hub (ICH) supports legacy and more cutting edge I/O. It is designed for use with the Intel® E7520 Memory Controller Hub (MCH). Intel has integrated features into the 6300ESB ICH that offer the performance, stability and reliability customers require for embedded computing applications. It improves bandwidth via PCI-X 64/66 and PCI 32/33 support. It also provides port 60/64 emulation, dual UARTs, four USB 2.0 ports, two SATA ports, primary and secondary IDE, and a two-stage watchdog timer. The Intel 6300ESB ICH and associated drivers help reduce support and validation costs.
DRAM
The CPU-71-10 supports 2 or 4 GBytes of DRAM and its DDR2-400 memory technology is ideal for memory-intensive applications, providing up to 20 percent increase in memory bandwidth, and up to 40 percent decrease in power consumption over DDR 266 memory. The memory subsystem interface to E7520 is dual channel, supporting two registered DIMMs per channel—depending on memory technology—for a total system bandwidth of up to 6.4 GB/second. ECC error correction is supported.
Four Gb Ethernet Ports
Two are accessible from the front panel while the other two are routed to the P0 connector in compliance with Vita 31.1. The CPU-71-10 gets its four Ethernet ports from two Intel® 82571EB Gigabit Ethernet Controllers. The 82571EB provides two fully integrated Gigabit Ethernet Media Access Control (MAC) and physical layer (PHY) ports. This device uses the PCI Express architecture (Rev. 1.0a) as a host interface. The Intel 82571EB supports Ethernet interfaces for 1000BASE-T, 100BASE-TX, and 10BASE-T applications. In addition to managing MAC and PHY Ethernet layer functions, the controller manages PCI Express packet traffic across its transaction, link, and physical/logical layers.
 
CPU-71-10 I/O Routing
I/O Front Panel* Through P0
P2
SVGA   1  
Serial ATA   2  
10/100/1000BaseTX 2 2  
Full Driven RS-232 Port     2
Two-wire Driven RS-232 Port     2
USB 2.0 2   2
PMC/XMC site #1 I/O     1
PMC site #2 I/O   1  
Primary IDE Interface     1

* Convection-cooled versions only. DRD conduction-cooled versions have no front panel I/O

** Both PMC(XMC) site I/O is also accessible through front panel on convection-cooled (CPU-71-10) versions

Ordering Information

Part#
Description
CPU-71-10-00 1.5 GHz Core2Duo, 2 GB DRAM memory down, No Flash, 0 to +70C - Convection cooled
CPU-71-10-01 1.5 GHz Core2Duo, 2 GB DRAM memory down, No Flash, -40 to +85C - Convection cooled
CPU-71-10-02 1.5 GHz Core2Duo, 2 GB DRAM memory down, No Flash, -40 to +85C - Conduction cooled
CPU-71-10-03 1.5 GHz Core2Duo, 4 GB DRAM memory down, No Flash, 0 to +70C - Convection cooled
CPU-71-10-04 1.5 GHz Core2Duo, 4 GB DRAM memory down, No Flash, -40 to +85C - Convection cooled
CPU-71-10-05 1.5 GHz Core2Duo, 4 GB DRAM memory down, No Flash, -40 to +85C - Conduction cooled
   
S10 10-11-00 Conformal coating option for 6U board - Factory option - MOQ 3

back to top