MPX5200

MPC5200B based scalable CPU module



Features

  • MPC5200B with e300 Power PC Core
  • Integrated DDR Memory Controller
  • up to 128MB DDR SDRAM·
  • up to 32MB Flash
  • DiscOnChip NAND-Flash (option)
  • up to 2MB SRAM (option)
  • MB86276 (Fujitsu Lime) Graphics Controller with separate SDRAM (option)
  • RTC, Watchdog, Reset Generator
  • Single 3,3V Supply
  • two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to Carrier Board
  • 32bit/ 66Mhz PCI Port
  • 1x Version 4 compatible ATA Interface
  • 10/100 Ethernet
  • High Speed Serial Ports
  • 2x USB 1.1 Ports
  • 2x I²C (Master or Slave)·
  • Serial Peripheral Interface (SPI)
  • General Purpose Parallel I/O (GPIO)
  • MPX Form Factor 66x77mm² allows mounting in both directions and stacking
  • optional -40° to +85°C
  • Support for VxWorks, Linux, QNX, OS-9


MPX5200

Based on Freescale's brand new MPC5200B processor the MPX5200 comes with multiple interfaces like PCI, USB, Mb Ethernets, CAN, serial and ATA. The tiny footprint of 66x77mm² allows the use in smallest devices. Options with onboard graphics are available (see MPX5200G). The MPX5200 forms part of the new MPX standard. The new connector technology allows mounting in both directions and stacking of modules with various interface boards. Versions for extended temperature (-40°..+85°C) are available.

CRX02 Carrier
The CRX02 Carrier Board covers physical layer especially for the MPX5200 and MPX5200G modules. It is designed not only for evaluating MPX modules during the design phase. Due to ist compact design it will fit into many applications directly. As the MPX technology allows stacking of boards application-specific functionality can be realised on dedicated PCBs that may be mounted on top of a combination CRX02-MPX-Module.

CRX02 Features

  • 1x 100/10 MBit Ethernet on RJ45 connectors
  • 2x USB 1.1 Host
  • 2x RS232 on RJ11 connectors
  • 1x CompactFlash-Slot (internally or with external access)
  • Reset-Key
  • User-LED
  • 12V DC supply, 100x120mm²

SBC5200
The SBC5200 is a complete MPC5200 based industrial computer with the tiny dimensions of only 100x120mm². It offers Ethernet and two USB, CAN and RS232 ports each on the front side. A cF-Slot is either available on the back side or may remain inside. Therefore the card connector may be mounted in an inner location. The SBC is based on MPX, which allows easy mounting of custom extension. It requires only +12V DC supply and works w/o any fan. Versions for extended temperature (-40°..+85°C) are available as well as a special housing with DIN-Rail mounting option.

SBC5200 Features

  • 1x 100/10 MBit Ethernet on RJ45 connectors
  • 2x USB 1.1 Host
  • 2x RS232 on RJ11 connectors
  • 1x CompactFlash-Slot (internally or with external access)
  • Reset-Key
  • User-LED
  • 12V DC supply, 100x120mm²

 

 

Additional Photos


CRX02 Carrier

SBC5200 complete MP5200B based industrial computer

CRX02 Block Diagram

MPE03 Header Pin Adapter for MPX Modules

MPE04 MPX Boot Module



DEV MPX
With an MPX module and a CRX carrier this kit contains all that one needs to get started working.

DEV MPX Features

  • Power Supply
  • 2x MPE03 MPX Header Pin Adaptor Boards
  • 2x MPC Connector 208 pol.
  • MPX Mounting Screw Set,
  • Adapter Cable RJ11 <-> SUBD-9,
  • Documentation incl. Schematics of Carrier Board

MPE03 Header Pin Adapter for MPX Modules
This Adaptor Boards is mounted on any MPX contact area on top or bottom of a MPX Module or CRX carrier. It makes all 208 lines accessible on header pins. FRCs or hole matrix boards may easily attached and allow rapid prototyping with MPX.

MPE03 Features

  • Makes all 208 lines of a (double) MPX connector available
  • 208 Header Pins arranged in blocks of 26
  • Standard 2,54mm pitch for easy attachment of FRC or Hole Matrix Boards

MPE04 MPX Boot Module
This module allows to restore the boot flash area of a MPX module. It is mounted on top or bottom of a MPX module. Withe the respective jumper setting the module will boot now from the flash area on the MPE04. The boot section may now be copied to the RAM area. After setting back the jumper it may be saved in the original boot flash of the MPX module. Now the MPX module will boot again on its own and the MPE04 can be removed.

MPE04 Features

  • Mounted on top or bottom of a MPX Module
  • Allows the MPX module to boot from the MPE04
  • Jumper selection between MPE04 and MPX flash area

MPE09 I/O Adaptor for MPX5200 8 DIGIN, 8 DIGOUT, AD, DA
The MPE09 offers a set of digital and analog I/Os. It fit onto or under a MPX module and targets primarily test and rapid prototyping.

MPE09 Features

  • I/O Extension Board for MPX Modules
  • 8x digital Input 24V galvanic isolation
  • 8x digital Output 24V - 30mA galvanic isolation
  • 4x analog Input 0..10V 8 bit
  • 2x analog Output 0..10V 8 bit

 

Ordering Information
Part# Description

830801

MPX5200 miriac™ MODULE MPC5200B 32MB DDR 16MB Flash

830802

MPX5200 miriac™ MODULE MPC5200B 32MB DDR 16MB Flash -40°/+85°C

830805

MPX5200 miriac™ MODULE MPC5200B 128MB DDR 16MB Flash, 128MB DoC, 2MB SRAM

830806

MPX5200 miriac™ MODULE MPC5200B 128MB DDR 16MB Flash, 128MB DoC, 2MB SRAM -40°/+85°C

S31601

SBC5200 Single Board Computer MPC5200B 32MB DDR 16MB Flash

S31606

SBC5200 Single Board Computer MPC5200B 128MB DDR 16MB Fl. 128MB DoC 2MB SR. -40°/+85°C

831601

CRX02 Carrier Board for MPX Modules optimized for MPX5200/MPX5200G

S30931

DEV-MPX Development Kit for MPX/SBC/SPS for MPX, SBC and SPS Products

831701

MPE04 MPX Boot Module for MPX5200(G) R1

831501

MPE03 MPX Header Pin Adapter Board 208 Lines

833301

MPE09 MPX I/O Adaptor for MPX5200 8 DIGIN, 8 DIGOUT, AD, DA

back to top