MPX8349

MPC8349E based scalable CPU module



Features

  • MPC8349 with e300 Power PC Core
  • Integrated DDR Memory Controller
  • 1260 MIPS@667MHz
  • up to 256MB DDR SDRAM (with ECC)·
  • up to 32MB Flash
  • DiscOnChip NAND-Flash (option)
  • 1MB SRAM (option)
  • RTC, Watchdog, Reset Generator
  • Single 3,3V Supply
  • two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to Carrier Board
  • 2x 32bit/ 66Mhz PCI Ports
  • 2x 10/100/1000 Ethernet
  • High Speed Serial Ports
  • 2x high speed USB Ports
  • 2x I²C (Master or Slave)·
  • Serial Peripheral Interface (SPI)
  • General Purpose Parallel I/O (GPIO)
  • optional -40° to +85°C
  • Software support for VxWorks, Linux and OS/9


MPX8349

Based on Freescale's brand new MPC8349E processor the MPX8349 comes with multiple interfaces like two PCI ports, two USB 2.0 interfaces and two Gb Ethernets. The MPX8349 forms part of the new MPX standard with a tiny 66x77 mm² footprint. The new connector technology allows mounting in both directions and stacking of modules with various interface boards. Versions for extended temperature (-40°..+85°C) are available. The MPX8349FA is a compatible variant with onboard FPGA.

CRX01 Carrier
The CRX01 Carrier Board covers physical layer for the most important MPX ports. It is designed not only for evaluating MPX modules during the design phase. Due to ist compact design it will fit into many applications directly. As the MPX technology allows stacking of boards application-specific functionality can be realised on dedicated PCBs that may be mounted on top of a combination CRX01-MPX-Module.

CRX01 Features

  • 2x 1000/100/10 MBit Ethernet on RJ45 connectors
  • USB 2.0 Host
  • 2x RS232 on RJ11 connectors, 1x 32-Bit PCI on edge connector
  • JTAG connector
  • Reset-Key
  • User-LED
  • 24V DC supply, Single Euro Format 100x160mm²

SBC8349
The SBC8349 is a complete MPC8349 based industrial computer with single-Euro form factor (100x160mm²). It offers two Gigabit Ethernet ports, two USB 2.0 and two RS232 on the front and PCI on the rear side (edge connector). The SBC8349 requires only +12V DC supply and works w/o any fan. Versions for extended temperature (-40°..+85°C) are available.

SBC8349 Features

  • 2x 1000/100/10 MBit Ethernet on RJ45 connectors
  • USB 2.0 Host
  • 2x RS232 on RJ11 connectors, 1x 32-Bit PCI on edge connector
  • JTAG connector
  • Reset-Key
  • User-LED
  • 24V DC supply, Single Euro Format 100x160mm²

 

 

Additional Photos

Rear View of MPX8349

CRX01 Carrier

SBC8349 complete MPC8349 based industrial computer

MPE03 Header Pin Adapter for MPX Modules

MPE04 MPX Boot Module



DEV MPX
With an MPX module and a CRX carrier this kit contains all that one needs to get started working.

DEV MPX Features

  • Power Supply
  • 2x MPE03 MPX Header Pin Adaptor Boards
  • 2x MPC Connector 208 pol.
  • MPX Mounting Screw Set,
  • Adapter Cable RJ11 <-> SUBD-9,
  • Documentation incl. Schematics of Carrier Board

MPE03 Header Pin Adapter for MPX Modules
This Adaptor Boards is mounted on any MPX contact area on top or bottom of a MPX Module or CRX carrier. It makes all 208 lines accessible on header pins. FRCs or hole matrix boards may easily attached and allow rapid prototyping with MPX.

MPE03 Features

  • Makes all 208 lines of a (double) MPX connector available
  • 208 Header Pins arranged in blocks of 26
  • Standard 2,54mm pitch for easy attachment of FRC or Hole Matrix Boards

MPE04 MPX Boot Module
This module allows to restore the boot flash area of a MPX module. It is mounted on top or bottom of a MPX module. Withe the respective jumper setting the module will boot now from the flash area on the MPE04. The boot section may now be copied to the RAM area. After setting back the jumper it may be saved in the original boot flash of the MPX module. Now the MPX module will boot again on its own and the MPE04 can be removed.

MPE04 Features

  • Mounted on top or bottom of a MPX Module
  • Allows the MPX module to boot from the MPE04
  • Jumper selection between MPE04 and MPX flash area

Ordering Information
Part# Description

830606

MPX8349 MPC8349/533/266 128MB ECC-DDR 16MB FLASH

830607

MPX8349 MPC8349/533/266 128MB ECC-DDR 16MB FLASH -40°/+85°C

830608

MPX8349 MPC8349/667/333 256MB ECC-DDR 16MB FLASH 128MB DoC 1MB SRAM

830609

MPX8349 MPC8349/533/266 256MB ECC-DDR 16MB FLASH 128MB DoC 1MB SRAM -40°/+85°C

830901

CRX01 Carrier Board for MPX Modules optimized for PowerQuiCC-based MPX

S30931

DEV-MPX Development Kit for MPX/SBC/SPS for MPX, SBC and SPS Products

831701

MPE04 MPX Boot Module for MPX5200(G) R1

831501

MPE03 MPX Header Pin Adapter Board 208 Lines

S30606

SBC8349 Single Bd. Comp. MPC8349/533/333 128MB DDR 16MB Fl.

S30608

SBC8349 Single Bd. Comp. MPC8349/667/333 256MB DDR 16MB Fl. 128MB DoC 1MB SR.

back to top