MPX8548

MPC8548 based scalable CPU module



Features

  • MPX8548 with e500 Power PC Core
  • 512kB L2Cache
  • Double-precision floating point APU
  • Integrated DDR Memory Controller
  • 3065 MIPS@1333MHz (estimated Dhrystone 2.1)
  • up to 1GB DDR II SDRAM (with ECC)
  • up to 32MB Flash
  • DiscOnChip NAND-Flash (option)
  • 1MB SRAM (option)
  • RTC, Watchdog, Reset Generator
  • Single 3,3V Supply
  • three 208 Pin Zero Force Connectors, that make all I/O and bus signals available to Carrier Board
  • Single 64-bit PCI/PCI-X or dual 32-bit PCI
  • 4x 10/100/1000 Enhanced three-speed Ethernet Controller (eTSECs)
  • x8/x4/x2/x1 PCI Express or 4x/1x serial RapidIO and x4/x2/x1 PCI Express
  • General Purpose Parallel I/O (GPIO)
  • optional -40° to +85°C
  • Software support for VxWorks, Linux


MPX8548

Based on Freescale's MPC8548 processor the MPX8548 comes with multiple interfaces like several serial and parallel PCI ports, RapidIO and up to four Gb Ethernets. The MPX8548 forms part of the new MPX standard with a tiny 66x88 mm² footprint. The new connector technology allows mounting in both directions and stacking of modules with various interface boards. Versions for extended temperature (-40°..+85°C) are available.

SBC8548
The SBC8548 is a complete MPC8548 based industrial computer with single-Euro form factor (100x160mm²). It offers two Gigabit Ethernet ports and two RS232 on the front and PCI on the rear side (edge connector). The SBC8548 requires only +12V DC supply. Versions for extended temperature (-40°..+85°C) are available.

SBC8548 Features

  • MPC8548 SBC with e500 Power PC Core
  • 512kB L2Cache
  • Double-precision floating point APU
  • Integrated DDR Memory Controller
  • 3065 MIPS@1333MHz (estimated Dhrystone 2.1)
  • up to 1GB DDR II SDRAM (with ECC)
  • up to 32MB Flash
  • DiscOnChip NAND-Flash (option)
  • 1MB SRAM (option)
  • RTC, Watchdog, Reset Generator 2x 1000/100/10 MBit Ethernet on RJ45 connectors
  • 2x RS232 on RJ11 connectors, 1x 32-Bit PCI on edge connector
  • PCIe with MPE13 (option)
  • JTAG connector
  • Reset-Key
  • User-LED
  • 24V DC supply, Single Euro Format 100x160mm²
  • Software-Support for Linux, VxWorks and OS-9
Additional Photos

SBC8548 complete MPC8548 based industrial computer



Ordering Information
Part# Description

833001

MPX8548/1000/400MHz 256MB ECC DDR2 32MB Flash

833002

MPX8548/1333/533MHz 512MB ECC DDR2 32MB Flash 256MB DoC 1MB SRAM

back to top